Tag Archive for "tungsten carbide powder" - Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel
Welcome to visit our website

Posts Tagged ‘tungsten carbide powder’

Titanium-based steel with alloy rod

Posted on: 十一月 25th, 2016 by langfeng No Comments


Langfeng material production of titanium-based steel bar hardness can not be higher than HRC62, HRC60 best, because it is combined with high manganese steel substrate, there is a characteristic, in the strong impact, extrusion conditions, rapid surface hardening Phenomenon, so that while maintaining toughness and plasticity of the hardened layer has a good wear resistance. If the titanium-based metal-bonded carbide bar itself hardness is too high, in the course of the brittle, fracture phenomenon.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Vanadium carbide product applications and case have?

Posted on: 四月 8th, 2016 by langfeng No Comments

VC powders

vanadium carbide powder used in the manufacture of high-performance steel and vanadium steel, can significantly improve the vanadium steel and steel high-temperature performance and wear resistance.

Titanium Carbonitride Powder

Posted on: 三月 29th, 2016 by langfeng No Comments
Ti(C,N) powders
Molecular weight:121.75
Density:5.43g/cm3 at 25°C(lit.)
Melting point: >350°C(lit.)
Titanium carbonitride has the appearance of a charcoal grey powder.  It has a high melting point, high hardness, excellent anti-oxidation ability, ductility, lubricity and wear-resistance.  Compared with titanium carbide, titanium carbonitride has lower friction coefficient and higher hardness, which improves the quality and lifetime of titanium carbonitride coated tools. Since TiN TiCN lower than the coefficient of friction and a higher hardness of the TiCN coating is more suitable for cutting tools such as stainless steel, titanium and nickel alloys and other hard materials, more wear resistance and high temperature stability, significantly improve tool life.
Performance and technical
Titanium carbide nitrides make the cermet has the following characteristic: Degree of hardness (HRA) reaches as high as 91-95, then achieves the nonmetallic ceramic cutting tool's degree of hardness level; Has the very good resistance to wear and ideal anti-crescent moon hollow attrition ability, when high-speed cutting steel materials the rate of wear is extremely low, its resistance to wear compared to WC base hard alloy high 3-4 times; Has the high thermal stability, high temperature degree of hardness, the strength at high temperatures and the high temperature resistance to wear is quite good, still could carry on the cutting under 1100-1300°C the high temperature, generally cutting velocity compared to WC base hard alloy high 2-3 times; Has the good chemical stability and high oxidation resistance ability; Compares with the hard alloy, Titanium carbide nitrides cermet has the very high resistance to wear, the oxidized degree to be lower, the heat-resistant knocking to be able to be better, suitable to serve as the high-speed cutting cutting tool material, can the very good control work piece GDOP and the common difference, the smooth finish is high, feed velocity higher; Processing carbon steel, stainless steel, micro alloy steel, as well as modular cast iron time can make the very good progress.

(W,Ta)C powder

Posted on: 三月 20th, 2016 by langfeng No Comments



Product introduction:
Model NO.:(w ta)
Classification:Mining and Metal
Character1:Wear Resistant in The Toughest Conditions
Character2:Extreme Hardness and High Toughness
Testing Methods of Ticn Particle Size-1:Fsss Particle Size, Laser Particle Analyzer,Appare
Testing Methods of Ticn Particle Size-2:Sem(Scaning Electron Microscope)
Export Markets:Global
Product application:
Application1:PVD Coating,Adding Carbon to a Tin Film Increases
Application2:Excellent All-Purpose Coating,Punching, Injection
Application3:Used as Additives at Cutting Tools, Tools
Application4:Coating at Milling (Wet, Moderate Cutting Speed)
Application5:Coating at Tapping, Thread Forming
wtac application

wtac technical data

(W,Ti,Ta,Nb)C powder

Posted on: 三月 20th, 2016 by langfeng No Comments


Product Introduction: 
Compound carbide powder is a kind of raw material extensively applied in hard alloys industry and other new materials industries, and generally it is made by solutionizing two or multiple kinds of carbide and other compound (such as nitride). Adopting unique carbonizing and solutionizing processes, our company produces compound carbide products with advantages such as stable composition, even distribution, high solid solubility, low impurity level and controllable granularity, and the tailor-made products are also available in the company to meet the customers’ specific requirements.
Product Application:
May improve the hard alloy as the hard alloy and cermet's chemical additive each performance. Also application in hot spraying, plasma spray coating, flinty thin film, electronic profession electric conduction domain.
Product performance and technical: 
Our company produces the compound carbide has (Ti,Ta)C,(W,Ta)C,(W,Ti)C,(Ta,Nb)C,(W,Ti,Ta)C,(W,Ti,Ta,Cr)C,(W,Ti,Ta,Nb)C, and so on. These product's chemical composition and the grain-size distribution may request according to the customer to carry on the production.
 wtitanbc application

wtitanbc technical data

Titanium carbide powder

Posted on: 三月 20th, 2016 by langfeng No Comments


1. The product possesses high purity, narrow range particle size distribution. Also, the product has a good conductivity and chemical inert ability to steel and iron.
2. The product’s melting point is about 3200 °C. It is an essential component of cemented carbide with high hardness, corrosion resistance, thermal stability, etc. Also, it is often used in manufacture of wear-resistant materials, cutting tools, mold, metal melting crucible and many other fields.
3. It is can applies in the thermal spray coating powder material, the welding material, the flinty membranous material, the military aviation material, the hard alloy and the cermet.
The binary, ternary, the quaternary compound solid solutions formed by titanium carbide and tungsten carbide, the tantalum carbide, the carbonized niobium, the chromic carbide, the titanium nitrides, can be applied as spray coating material, the welding material, the flinty membranous material, the military aviation material, the hard alloy and the cermet.

tic application

tic technical data

Molybdenum carbide powder

Posted on: 三月 20th, 2016 by langfeng No Comments

Mo2C powders


Molybdenum Carbide Mo2C Powder (Mo2C, 2.5um, High Purity 99.9%, Hexagonal, metal basis)
Molecular weight:203.88
Purity: 99.9%
Color: Dark Gray
Carbon: 5.85%
Free Carbon: 0.3%
[O]: <0.5%
Ultrafine molybdenum carbide powder is prepared through a special process method. It is a close-packed hexagonal lattice, also face-centered cubic lattice. the molybdenum carbide does not react with anaerobic acid , soluble in nitric acid and aqua regia obtaining carbon. Density: 9.18g/cm3; Melting point: 2690±500oC. It has a higher melting point and high hardness, good thermal stability and mechanical stability, excellent corrosion resistance. Applications: ultrafine molybdenum carbide powder can be used as a coating material, can also be used as the added material, widely used in various high temperature, abrasion and chemical resistant.
Widely uses in response like response and so on alkane isomerization which,unsaturated hydrocarbon hydrogenation, hydrodesulfurization and denitrogenation has the hydrogen to participation catalysts,serves as the ultra hard tool material,the anti-friction material,the heating element material as well as the high temperature structural material.
mo2c application

mo2c technical data

Zirconium carbide powder

Posted on: 三月 19th, 2016 by langfeng No Comments


Molecular weight:103.22        
Carbon content:11.64%
Melting point:3540ºC
Boiling point: 5100ºC
ZrC powder achieved production technical patent.
Patent number: 2010102470107
Zirconium carbide (ZrC) is an extremely hard refractory ceramic material,It is usually processed by sintering.It has the appearance of a gray metallic powder with cubic crystal structure. Has highly corrosion resistant and high surface activity, also has the property of Oxidation resistance, high intensity, good thermal conductivity, excellent toughness.
Zirconium carbide powder is a kind of a gray metallic powder with properities of corrosion resistance, high surface activation, high hardness, good thermal conductivity (20.5 W/m·K ) and electrical conductivity : resistivity ~43 μΩ·cm, high melting point : ~3530 °C. Compared to other metal carbide powders, like WC tungsten carbide powder, tantalum carbide powder TaC powder, Hafnium carbide powder HfC powder, the density (6.73 g/cm3 ) is lower. Due to this properity, zirconium carbide powder ZrC powder is more suitable to be used in the field of re-entry vehicles, rocket in which low density and high temperature load-bearing capabilites and crucial requirements. The mixture of TaC and ZrC ( with the mole ratio 4:1 ) is a thermionic emission with very high melting point. The fine Zirconium carbide ZrC powder is an important cermet material.
Zirconium carbide commercially used in tool bits for cutting tools,can be used as welding thermal spray coating material, and has the highly effective absorption visible light, reflection infrared and wear protection solution, stored energy regeneration and so on characteristic.Also Zirconium carbide cermet powder is manufacture high technology and new technology domain and so on high performance hard alloy,aerospace,atomic energy, textile,electronic,coating,flinty thin film and metallurgy automation key materials.

technical data of zirconium carbide powderzrc powder, used in target material, powder metallurgy,petro chemical industry
1. Nano size zirconium carbide powder:  due to its characteristic of absorption visible light, reflection infrared and energy store, it is widely used on special textile fiber with the function of theraml isolation and heat storage, such as like bluejean, thermal underwear, winter gym suit....etc;
2. Zirconium carbide powder could be applied into new carbon complex function materail, improve performance on the garde of high temperature resistance and corrosion resistance. Now it is widely used in the field of military and aerospace.
3. Zirconium carbide powder also could be applied on the product of electrode, the fireproof crucible and negative pole electron emission material.
4. With the properity of high hardness, zirconium carbide powder also acts as an important abrasive .
5.  zirconium carbide powder in size 40-60mesh (250-380um), 60-80mesh (180-250um), 80-100mesh (150-180um), 100-150 mesh(106-150um), 150-200mesh (75-106um), 200-400mesh (38-75um), 200-325mesh (45-75um), -325mesh (-45um ), -400mesh (-38um) is usually be used in the field of  high heat resitance thermal sparay coating;
6. Zirconium carbide powder in APS (average particle size) FSSS 3-5 micron and FSSS 0.8-1.5 micron, usually be used as additive in cemented carbide products, like cutting tools...etc.


zrc technical data
zrc technical data2