Tag Archive for "titanium material" - Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel - page 2
Welcome to visit our website
Search:

Posts Tagged ‘titanium material’

TiC high wear resistance steel bonded hard alloy

Posted on: 六月 17th, 2016 by langfeng No Comments

Tic based cermet rod2

TiC high wear resistance steel bonded hard alloy fero-TiC Titanium Carbide rod, which contains 47-50wt% of a hard phase TiC and 37-40 wt% of a bonding phase high manganese steel, wherein the bonding phase contains, by weight, 2.0-4.0% of Ni, 10.0-12.0% of Mn, and the balance elements.

The high fierce steel bonded fero-tic titanium carbide rod is mainly prepared by the following steps of: proportioning, compaction, sintering. The non magnetic titanium alloy material has advantages of uniform austenite microstructure, high wear resistance, good strength and good pourability. Fero-Tic inserts are widely  used in mining industry, especially on high manganese steel crusher hammer.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

The technical parameters of Titanium carbide rods,titanium carbide cermets rods,steel-bonded alloys rods,titanium-based alloy rods,titanium carbide based cemented carbide rod?

Posted on: 六月 7th, 2016 by langfeng No Comments

Tic based cermet rod1

The technical parameters of Titanium carbide rods,titanium carbide cermets rods,steel-bonded alloys rods,titanium-based alloy rods,titanium carbide based cemented carbide rod?

Langfeng Metal manufacturer of titanium carbide metal rods, metal titanium carbide ceramic rods, steel-bonded alloys, titanium-based alloy rods, titanium-based alloy rod with the technical parameters as below:

Strength(ISO3327): 1800+200(N/mm2)
Density (ISO): 6.2 ±0.2 g/cm3
Hardness(ISO3327): 82.5±0.5 HRA 62.5±0.5 HRA
Average Grain Size:2.0 ±0.5 μm
Characteristic:A02B00C00
Chemical composition:Ni2.0%/TiC47.0%/Fe37.0%/Mn10.0%

For more information please link: http://www.langfengmetal.com/tic-based-cermet-rod.html,please contact: angela@metalcarbidepowder.com

The notes when Machining titanium carbide rods

Posted on: 五月 4th, 2016 by langfeng No Comments

Titanium carbide Nitride cermets rod 2

The notes when Machining titanium carbide rods, titanium carbide cermets rods, steel with gold, carbide, titanium-based alloys, titanium carbide base cemented carbide wear parts:
1) steel is suitable for the high manganese steel material.
2) steel casting than normal without titanium carbide rods, titanium carbide fund is a ceramic rod, steel combined with gold, titanium carbide alloy, carbide, titanium carbide base 60-100 degrees,
3) before use, first the titanium carbide rods, titanium carbide fund is a ceramic rod, steel combined with gold rods, titanium carbide alloy rods, titanium carbide base boron carbide rods fly sand water salt solution immersion, remove dry and then use (DNA)
4) casting, fixed first titanium carbide rods, titanium carbide fund is a ceramic rod, steel combined with gold rods, titanium carbide alloy rods, titanium carbide carbide rods on steel, JiaoGangShui again, (because the density of TIC is lighter than steel,
Without fixed first titanium carbide rods, titanium carbide fund is a ceramic rod, steel combined with gold rods, titanium carbide alloy rods, titanium carbide carbide stick, stick instability.
5)after forming, heat treatment, and water toughening treatment with high manganese steel water
Tips: Please refer our customers to use precautions, wear parts in your favor more wear and longer service life.

 

Stay tuned for detailed product information company official website: http://www.langfengmetallic.com/tic/

Titanium carbide rods destined for Vietnam

Posted on: 四月 27th, 2016 by langfeng No Comments

Tic based cermet rod2

April 26th 2016, The customer in Vietnam have place 1 ton of Titanium carbide rod order for their hammer crusher header, they are very satisfied with the TiC rod quality, and can order 3-5 ton each year.

Hope Langfeng metallic material’s TiC cermet rod can help more and more manufacturer of casting alloy for whole of world.

TiC Based Cermets are mainly applied to the alloy ball, hammer head, alloy plate and large crusher hammers, large ball mill wearing parts, improve the service life of equipment;

Stay tuned for detailed product information company official website: www.langfengmetal.com

Tic rod used in hammer head of crusher

Posted on: 四月 25th, 2016 by langfeng No Comments

Tic based cermet rod2

The TiC rod also named high mangness steel combined alloy, which is mainly used for heavy machinery hammer head of crusher, which improving the working life 3to5 times of the equipment, since the titanium have strong high temperature resistant corrosive.
Changsha Langfeng metallic material Co.,Ltd can provide such tic rod to meet your demand, there are various size for your choose, the most popular size are Dia 12 * 50; Dia 14 * 60. Trust the Titanium carbide rod can greatly improve the efficiency of the the crusher hammer.

Langfeng metallic material Ltd undertake the mission”benefiting all under the heaven”,creating value for customers,help employees grow and help more people progress and development is our firm goal.We specialize in military new materials of rocket systems , coating materials, carbide, cermet cutting tools and development of raw materials, high speed steel twist drill production and sales.Companies advocating green ideas, energy efficiency is the direction of the company, according to the needs of the company’s strategic development, the establishment of an industrial microwave division which is responsible for product development,and production sales.

Stay tuned for detailed product information company official website: http://www.langfengmetal.com/