Tag Archive for "titanium carbide" - Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel
Welcome to visit our website
Search:

Posts Tagged ‘titanium carbide’

Niobium carbide powder

Posted on: 十二月 28th, 2016 by langfeng No Comments

nbc-powders

Niobium carbide powder, Density:7.56g/cm3,melting point:3490°C. CAS No.: 12069-94-2, UN No.: 3178, chemical formula NbC, Niobium carbide powder is brown-gray metallic powder with purple lustre. The powder have the properties of high melting point,high hardness,high chemical stability,it is applied in the field of high temperature refractory material and cemented carbide products.

Choose High purity 99.99% Niobium oxide and High purity carbon black raw material, ensure the purity of Niobium carbide powder.

The special original additive application technology, ensure the powder grain densification, carbide sintered uniform, uniform particle size, Unique carbide sintering technology ensures low oxygen content, low free carbon, stable product quality.

For more information please link:www.metalcarbidepowders.com, please contact:info@langfengmetallic.com

Titanium-based steel with alloy rod

Posted on: 十一月 25th, 2016 by langfeng No Comments

ferro-tic

Langfeng material production of titanium-based steel bar hardness can not be higher than HRC62, HRC60 best, because it is combined with high manganese steel substrate, there is a characteristic, in the strong impact, extrusion conditions, rapid surface hardening Phenomenon, so that while maintaining toughness and plasticity of the hardened layer has a good wear resistance. If the titanium-based metal-bonded carbide bar itself hardness is too high, in the course of the brittle, fracture phenomenon.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

The working principle of titanium carbide bar

Posted on: 十一月 22nd, 2016 by langfeng No Comments

ferro-tic rods

Titanium carbide rods using low-cost high-manganese steel or ultra-high manganese steel for the large wear-resistant parts of the matrix material, in their parts of the composite titanium carbide cermet inlay, so wear-resistant bimetallic wear-resistant parts with excellent resistance to wear Abrasive, non-wear surface with excellent plasticity and impact toughness. Has been successfully used for large jaw plate, rolling mortar wall, broken wall, vertical grinding roller, vertical grinding disc liner, counter-breaking plate hammer, installed by the user to use, consistent response is good.

 

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Application of Titanium Carbide Powder in Metallurgical Field

Posted on: 十一月 8th, 2016 by langfeng No Comments

TiC powdersPowder metallurgy field:
Submicron superfine titanium carbide powder for powder metallurgy production of ceramics, carbide parts of raw materials, such as drawing film, carbide molds. (2) good wear resistance, low wear rate; (3) good high temperature and oxidation resistance (1) high hardness, high hardness, ; (4) thermal conductivity, chemical stability.

For more information please link:www.metalcarbidepowder.com, please contact:angela@metalcarbidepowder.com

Niobium carbide powder,NbC Powder Application

Posted on: 五月 20th, 2016 by langfeng No Comments

NbC powders

Niobium carbide powder, NbC Powder Application

1. it is normally worked as additive in cemented carbide product, from WC-Nbc-C solid solution.
2. May also make the purple artificial jewel.
3. Together with the tungsten carbide powder and Molybdeum carbide powder,  Niobium carbide powder is used as additive in the field of spray coating material, welding powder material, such as hot forging die, the cutting tool, the jet engine turbine blade, the valve, the tail skirt and the rocket spray nozzle coating.
Niobium carbide powder in size 40-60mesh (250-380um), 60-80mesh (180-250um), 80-100mesh (150-180um), 100-150 mesh(106-150um), 150-200mesh (75-106um), 200-400mesh (38-75um), 200-325mesh (45-75um), -325mesh (-45um ), -400mesh (-38um) is usually be used in the field of  high heat resitance thermal sparay coating ;

The notes when Machining titanium carbide rods

Posted on: 四月 8th, 2016 by langfeng No Comments

ticn based cermet rod2

The notes when Machining titanium carbide rods, titanium carbide cermets rods, steel with gold, carbide, titanium-based alloys, titanium carbide base cemented carbide wear parts:

1) steel is suitable for the high manganese steel material.

2) steel casting than normal without titanium carbide rods, titanium carbide fund is a ceramic rod, steel combined with gold, titanium carbide alloy, carbide, titanium carbide base 60-100 degrees

3) before use, first the titanium carbide rods, titanium carbide fund is a ceramic rod, steel combined with gold rods, titanium carbide alloy rods, titanium carbide base boron carbide rods fly sand water salt solution immersion, remove dry and then use (DNA)

4) casting, fixed first titanium carbide rods, titanium carbide fund is a ceramic rod, steel combined with gold rods, titanium carbide alloy rods, titanium carbide carbide rods on steel, JiaoGangShui again, (because the density of TIC is lighter than steel,

Without fixed first titanium carbide rods, titanium carbide fund is a ceramic rod, steel combined with gold rods, titanium carbide alloy rods, titanium carbide carbide stick, stick instability.

5)after forming, heat treatment, and water toughening treatment with high manganese steel water

Tips: Please refer our customers to use precautions, wear parts in your favor more wear and longer service life.

Stay tuned for detailed product information company official website:www.langfengmetal.com, please contact: angela@metalcarbidepowder.com

Titanium Carbonitride Powder

Posted on: 三月 29th, 2016 by langfeng No Comments
Ti(C,N) powders
Molecular weight:121.75
Density:5.43g/cm3 at 25°C(lit.)
Melting point: >350°C(lit.)
Titanium carbonitride has the appearance of a charcoal grey powder.  It has a high melting point, high hardness, excellent anti-oxidation ability, ductility, lubricity and wear-resistance.  Compared with titanium carbide, titanium carbonitride has lower friction coefficient and higher hardness, which improves the quality and lifetime of titanium carbonitride coated tools. Since TiN TiCN lower than the coefficient of friction and a higher hardness of the TiCN coating is more suitable for cutting tools such as stainless steel, titanium and nickel alloys and other hard materials, more wear resistance and high temperature stability, significantly improve tool life.
 
Performance and technical
Titanium carbide nitrides make the cermet has the following characteristic: Degree of hardness (HRA) reaches as high as 91-95, then achieves the nonmetallic ceramic cutting tool's degree of hardness level; Has the very good resistance to wear and ideal anti-crescent moon hollow attrition ability, when high-speed cutting steel materials the rate of wear is extremely low, its resistance to wear compared to WC base hard alloy high 3-4 times; Has the high thermal stability, high temperature degree of hardness, the strength at high temperatures and the high temperature resistance to wear is quite good, still could carry on the cutting under 1100-1300°C the high temperature, generally cutting velocity compared to WC base hard alloy high 2-3 times; Has the good chemical stability and high oxidation resistance ability; Compares with the hard alloy, Titanium carbide nitrides cermet has the very high resistance to wear, the oxidized degree to be lower, the heat-resistant knocking to be able to be better, suitable to serve as the high-speed cutting cutting tool material, can the very good control work piece GDOP and the common difference, the smooth finish is high, feed velocity higher; Processing carbon steel, stainless steel, micro alloy steel, as well as modular cast iron time can make the very good progress.

TiC based cermet rod

Posted on: 三月 20th, 2016 by langfeng No Comments

 

tic cermet rod

 

Product technical parameters:
1,Hardness (ISO 3878): 82.5±0.5 HRA
2,Density : 6.2 ±0.2 g/cm3
3,TRS (ISO 3327): 1800-2000 N/mm2
4,Average Grain Size:   2.0 ±0.5  μm
5,Porosities: A02B00C00
6,CHEMICAL: TiC(47%)-Fe(37%)-Ni (2.0%)-Mn (10.0%) Other(4.0%)

 

 
Application:
The product is mainly used for heavy machinery gear tunneling of road header which plays an important role in improved boring machine life,it can improve even 3 to 5 times. Pick contact directly with the rock, so it is life influence boring machine's efficiency. Lot of machine such as S100, EBJ1600 with a lot of disadvantages like low hardness, poor wear resistance, big coefficient of friction, poor corrosion resistance, low thermal conductivity and so on. The titanium carbide based cermet can be used in bad working environment, and it can growth the life.the titanium have strong high temperature resistance corrosive, so it is composite materials also have such characteristics.

 

(W,Ti,Ta)C powder

Posted on: 三月 20th, 2016 by langfeng No Comments

 

 (W,Ti,Ta)C powders

Product introduction:
Widely used in Super hard materials, carbide, capacitors, powder metallurgy,  refractory alloy of gold, used as an alloying addition and used in the production of welding electrodes, refractory and the manufacture of high temperature ceramic.
 
Product application:

Compound carbide power: As the addictives in hard alloys and cermet, it can improve the performance ofhard alloys. Also it can apply in hot spraying, plasma spray coating, hard thin film, and electric conduction.

Specifications:
1 stable composition
2 controllable granularity
3 high solid solubility, low impurity level
4 hard alloy, hard films, targetwtitac application

wtitac technical data

Titanium carbide powder

Posted on: 三月 20th, 2016 by langfeng No Comments

 

Introduction:
1. The product possesses high purity, narrow range particle size distribution. Also, the product has a good conductivity and chemical inert ability to steel and iron.
 
2. The product’s melting point is about 3200 °C. It is an essential component of cemented carbide with high hardness, corrosion resistance, thermal stability, etc. Also, it is often used in manufacture of wear-resistant materials, cutting tools, mold, metal melting crucible and many other fields.
 
3. It is can applies in the thermal spray coating powder material, the welding material, the flinty membranous material, the military aviation material, the hard alloy and the cermet.
Application:
The binary, ternary, the quaternary compound solid solutions formed by titanium carbide and tungsten carbide, the tantalum carbide, the carbonized niobium, the chromic carbide, the titanium nitrides, can be applied as spray coating material, the welding material, the flinty membranous material, the military aviation material, the hard alloy and the cermet.

tic application

tic technical data