Tag Archive for "Spraying materials" - Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel
Welcome to visit our website

Posts Tagged ‘Spraying materials’

The use of chromium carbide

Posted on: 四月 26th, 2017 by langfeng No Comments

chromium carbide
Chromium carbide used in chromium carbide wear-resistant electrode; chromium carbide used in high hardness chromium carbide wear-resistant composite steel plate; chromium carbide used in ultra-fine grain cemented carbide; chromium carbide used in nickel chromium chromium carbide powder (NiCr-Cr3C2); Chromium carbide used in the manufacture of special welding materials, welding electrode series, flux cored wire; thermal spray powder material; arc sprayed wire and submerged arc welded pipe wire; Cr3C2 as the main body to Ni or Ni-based alloy for the bonding phase Of chromium carbide cement (including wire and powder) is a wear-resistant and corrosion-resistant and high temperature oxidation of the new carbide, known as “hard alloy in the stainless steel.”

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Factors Affecting Sintering Quality of Powder Products

Posted on: 二月 16th, 2017 by langfeng No Comments

carbide powder sintering process

There are many factors that affect the performance of the sintered body, mainly the properties of the powder body, the forming conditions and the conditions of sintering. Sintering conditions include heating rate, sintering temperature and time, cooling rate, sintering atmosphere and sintering pressure conditions.
The sintering temperature and the length of the length of the sintered body of the porosity, density, strength and hardness. Sintering temperature is too high and too long, will reduce product performance, and even products over burned defects; sintering temperature is too low or too short, the product will be due to undercurrent caused by performance degradation.

For more information please link:www.metalcarbidepowder.com, please contact:angela@metalcarbidepowder.com