langfeng, Author at Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel - Page 6 of 15 Archive - Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel - page 6
Welcome to visit our website
Search:

Author Archive

The principle of microwave furnace technology

Posted on: 八月 12th, 2016 by langfeng No Comments

LF-PH9010 Graphite and Graphene Industrial Microwave Expansion Furnace
The interaction of an electric field with a material may elicit several responses, and microwaves can be reflected, absorbed and/or transmitted by the material. In a conductor, electrons move freely in the material in response to the electric field, resulting in electric current. Unless the material is a superconductor, the flow of electrons will heat the material through resistive heating.

However, microwaves will be largely reflected from metallic conductors, and therefore such conductors are not effectively heated by microwaves. In insulators, electrons do not flow freely, but electronic reorientation or distortions of induced or permanent dipoles can give rise to heating.

For more information please link:www.industryequips.com, please contact:postmaster@industrialmicrowavefurnace.com

The after-treatment coating process

Posted on: 八月 9th, 2016 by langfeng No Comments

mo2c application

With the cutting tools become more sophisticated, customers coating quality, performance requirements are also increasing, not only requires a coating with high hardness, high wear resistance, while the tool and surface finish requirements processed products higher and higher.
Thus, after the coating treatment process began to receive widespread attention. The technology for different tools after coating, and through special equipment for coating the surface of the tool for grinding, polishing, coating tool life by this process can be further increased by 20% on the basis of conventional coatings on tool life ~ 100% or so.

 

For more information please link: www.metalcarbidepowder.com, please contact:angela@metalcarbidepowder.com

Tips of buying planetary ball mill

Posted on: 八月 6th, 2016 by langfeng No Comments

small valume planetary ball mill (1)

Buy a planetary ball mill should note the following:
1, select the appropriate grinding method according to the desired physical properties of the ground sample moisture, hardness, and viscosity planetary ball mill;
2, depending on the chemical nature of the pH of the sample required for grinding, oxidation and other select materials and forms suitable jar mill, grinding balls and material ratio;
3. The amount of processing required for sample selection for the right planetary ball mill pot and specifications;

For more information please link our company official website:http://www.langfengmetallic.com/ball-mill/planetary-ball-mill.html, please contact: postmaster@langfengmetallic.com

How to buy satisfied industrial microwave equipment

Posted on: 八月 3rd, 2016 by langfeng No Comments

LF-MF1516 70mm Industrial Microwave Tube Furnace

 

All customers want to buy genuine good products, good equipment, how can buy satisfied microwave equipment? Is not difficult, as long as the intentions of inquiry and investigation tests, some manufacturers do not just listen to too much publicity, start-up companies say, “What the largest, there are hundreds of thousands of customers,” just learn a little knowledge, to buy some components imitation assembly, and called “the most advanced technology,” some customers after the purchase of equipment to know the truth, some customers are never come to understand that all of microwave equipment and technology are the same, once the problem is negated, so really good microwave equipment suffered injustice, microwave technology application and promotion are also severely affected.

 

If you have any requirements about the rods,such as: TiC rods,ticn cermet rods,carbide rods,please kindly feel free to contact us:  postmaster@metalcarbidepowder.com, please link: http://www.industryequips.com/

The technical parameters of TiCN based cermet rods

Posted on: 八月 2nd, 2016 by langfeng No Comments

Titanium carbide Nitride cermets rod 2

Langfeng Metal manufacturer of Titanium carbide cermet rods, cermet cutting tools, cermet inserts,cermet milling cutters,cutting tool materials with the technical parameters as below:

TRS(ISO3327): 2050(N/mm2)
Density (ISO): 6.45g/cm3
Hardness(ISO3327): 92±0.5HRA
Average Grain Size: 0.8-1.0μm
Characteristic: A02B00C00

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

What application of the TiCN cermet rods,cermet cutting tools and cermet rods?

Posted on: 八月 1st, 2016 by langfeng No Comments

wtic application

Langfeng Metal manufacturer of cermet rods can be used to make a variety of drill, car knife, printed circuit boards, special tools, special tools engine,clocks, processing of special tools, the overall mills, chisel,mandrel and hole machining tools,and also can be used for cutting aluminum, cast iron, stainless steel, alloy steel, nickel-based alloys, titanium, non-ferrous metals,various grades and performance carbide tool manufacturers worldwide has been widely recognized,etc.

For more information please link our company official website:http://www.langfengmetallic.com/, please contact: postmaster@langfengmetallic.com

The principles of microwave heating

Posted on: 七月 28th, 2016 by langfeng No Comments

LF-ZK6016 Industrial Microwave high Vacuum Furnace manufacturers

The principles of microwave heating are discussed with reference to dielectric properties, heating phenomena and microwave equipment. Microwave regeneration of granular activated carbon for the carbon-in-pulp process is examined on a laboratory scale, with special attention being given to highlight the problem areas and specific considerations related to microwave heating. Results indicate that microwave regeneration of carbon with 40% moisture on a wet basis by heating to 650°C with steam addition regenerates the carbon to virgin carbon activity levels but with a higher abrasion resistance.

 

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Where quality of Titanium carbide rods is the most stable?

Posted on: 七月 25th, 2016 by langfeng No Comments

ferro-tic rods

Langfeng Metal.

As professional as strict quality control system, because the company attaches great importance to the quality and therefore the quality of Langfeng Metal Titanium carbide rods, titanium carbide cermetsrods, steel with gold bars, carbide, titanium-based alloy rods, titanium carbide-based alloy rod  is the most stable.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

sintering materials by direct microwave heating

Posted on: 七月 22nd, 2016 by langfeng No Comments

Various fundamental problems are usually encountered when sintering materials by direct microwave heating. Most of the research on material processing by microwaves is based on conventional low-frequency (2.45 GHz) microwave applicators. However, such applicators do not couple microwave power efficiently to many ceramics at room temperature, and poor microwave absorption characteristics make initial heating difficult.

 

Thermal instabilities may occur, which can lead to the phenomenon of thermal runaway; i.e., the specimen overheats catastrophically. The temperature gradients inherent in volumetric heating can lead to severe temperature non-uniformities, which, at high heating rates, may cause non-uniform properties and cracking.

 

For more information please link:www.industryequips.com, please contact:angela@metalcarbidepowder.com

The uses of Titanium carbide rods

Posted on: 七月 19th, 2016 by langfeng No Comments

ferro-tic rods

Langfeng Metal production of titanium carbide metal rods, metal titanium carbide ceramic rods, steel with gold bars, carbide, titanium-based alloy rods carbide, titanium-based alloy rod is widely used in wear-resistant alloy ball, wear-resistant alloy inch plate and large crusher hammers, large ball wearing parts, to wear corrosion effect, thereby enhancing the life of the equipment.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com