十一月 2016 - Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel Archive - Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel
Welcome to visit our website
Search:

Archive for 十一月, 2016

High manganese steel wear parts applied in tic rod

Posted on: 十一月 29th, 2016 by langfeng No Comments

ferro-tic rods

Titanium-based steel with gold rods used in high manganese steel wear parts.

The use of low-cost high-manganese steel or ultra-high manganese steel for the large wear-resistant parts of the matrix material, in their work-site composite inlaid TM52 titanium carbide-based titanium carbide-bonded carbide rods to wear wear-resistant bimetallic parts Has excellent wear resistance, non-wear surface with excellent plasticity and impact toughness. Has been successfully used for large jaw plate, rolling mortar wall, broken wall, vertical grinding roller, vertical grinding disc liner, counter-breaking plate hammer, installed by the user to use, consistent response is good.

Titanium-based steel bar with a total weight of 6-8% of the hammer, plate hammer can account for 10%, generally less than 20KG hammer is not recommended.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Titanium-based steel with alloy rod

Posted on: 十一月 25th, 2016 by langfeng No Comments

ferro-tic

Langfeng material production of titanium-based steel bar hardness can not be higher than HRC62, HRC60 best, because it is combined with high manganese steel substrate, there is a characteristic, in the strong impact, extrusion conditions, rapid surface hardening Phenomenon, so that while maintaining toughness and plasticity of the hardened layer has a good wear resistance. If the titanium-based metal-bonded carbide bar itself hardness is too high, in the course of the brittle, fracture phenomenon.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

The working principle of titanium carbide bar

Posted on: 十一月 22nd, 2016 by langfeng No Comments

ferro-tic rods

Titanium carbide rods using low-cost high-manganese steel or ultra-high manganese steel for the large wear-resistant parts of the matrix material, in their parts of the composite titanium carbide cermet inlay, so wear-resistant bimetallic wear-resistant parts with excellent resistance to wear Abrasive, non-wear surface with excellent plasticity and impact toughness. Has been successfully used for large jaw plate, rolling mortar wall, broken wall, vertical grinding roller, vertical grinding disc liner, counter-breaking plate hammer, installed by the user to use, consistent response is good.

 

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Titanium-based carbonitride cermet bar advantages

Posted on: 十一月 18th, 2016 by langfeng No Comments

ticn-based-cermet-rod-5

Brand: Langfeng metal

Product Name: Titanium-based carbonitride cermet bar

Material: titanium carbonitride

Uses: high-speed CNC tool materials

1. Product advantages
Cermet tools have higher toughness than ceramic tools, are more abrasive and faster than carbide, and metal ceramics have superb surface finish and high-speed processing. High-speed finishing and milling technology for mild steel, carbon steel, alloy steel and stainless steel, to achieve superb turning, groove, boring, bearing and milling level. Is a cermet having excellent chipping resistance and abrasion resistance. With excellent thermal conductivity and grinding, steel processing, the best choice for steel turning, slotting, boring, bearing and milling. Covering a wide range of steel finishing to rough processing.

2. Strong wear resistance
Cermet hardness is higher than sintered carbide material, compared with the hard alloy, in high temperature conditions and ferrous metal processing workpiece affinity is low, can obtain better surface finish, from low speed to high speed machining possible. High tool life during high speed finishing. Compared with the coating carbide, more suitable for light cutting (finishing). In the same cutting conditions, can be more wear resistance and surface accuracy.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Microwave processing features

Posted on: 十一月 15th, 2016 by langfeng No Comments

microwave-furnace

Microwave processing features:

1, microwave equipment, food processing convenience, health, fast, high degree of preservation, less nutrient loss.

2, microwave equipment can be processed by the types of food.

3, can be processed by conventional equipment can not get the sensory quality.

4, in industrial applications, large-scale intensive production methods to provide consumers with only a little cooking can be eaten prefabricated food and frozen food.

5, microwave processing equipment, more and more widely.

For more information please link:www.industryequips.com, please contact:postmaster@industrialmicrowavefurnace.com

Microwave treatment of carbon gold technology prospects

Posted on: 十一月 11th, 2016 by langfeng No Comments

Microwave Lab Furnace

Microwave treatment of carbon gold technology prospects

At present, the pretreatment methods of carbonaceous gold ores mainly include competitive adsorption, passivation, aqueous solution chemical oxidation, oxidation roasting and other processes. However, these pretreatment methods in the application, will be subject to a number of factors. As a new green metallurgy method, microwave technology has been paid much attention in the fields of grinding, pretreatment, drying, roasting, metal extraction and soot disposal and utilization. Some research results are gradually transferred to a practical stage, preliminary shows the microwave technology in the metallurgical application of the great potential.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Application of Titanium Carbide Powder in Metallurgical Field

Posted on: 十一月 8th, 2016 by langfeng No Comments

TiC powdersPowder metallurgy field:
Submicron superfine titanium carbide powder for powder metallurgy production of ceramics, carbide parts of raw materials, such as drawing film, carbide molds. (2) good wear resistance, low wear rate; (3) good high temperature and oxidation resistance (1) high hardness, high hardness, ; (4) thermal conductivity, chemical stability.

For more information please link:www.metalcarbidepowder.com, please contact:angela@metalcarbidepowder.com

Carbide Glass Knife Product Details

Posted on: 十一月 4th, 2016 by langfeng No Comments

tungsten-carbide-glass-cutting-wheel-3
1. Carbide glass knife compared with the traditional cutting knife, the operation is more simple and quick, environmentally friendly noise-free pollution.
2. Tungsten steel material, wear-resistant ultra-good, long service life.
3. Hardness ≥ 87, sharp blade, cutting glass, high efficiency.
4. Can be customized according to customer requirements size of production, price concessions, fast delivery.
5. Smooth cut surface without scratches, no glitches and other characteristics, mainly for LCD optical glass, 0.2 ultra-thin glass, quartz glass, crystal glass.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Titanium carbide rod working principle

Posted on: 十一月 1st, 2016 by langfeng No Comments

ferro-tic

Titanium carbide rod Tic rod working principle

The use of low-cost high-manganese steel or ultra-high manganese steel for the large wear-resistant parts of the matrix material, in their parts of the composite inlay titanium carbide cermet rods, wear-resistant bimetallic wear-resistant parts with excellent wear resistance, The non-wear surface has excellent ductility and impact toughness. Has been successfully used for large jaw plate, rolling mortar wall, broken wall, vertical grinding roller, vertical grinding disc liner, counter-breaking plate hammer, installed by the user to use, consistent response is good.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com