八月 2016 - Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel Archive - Metal carbide powder,TiC cermet rod,TiCN cermet rod,Titanium oxide,cutting wheel
Welcome to visit our website
Search:

Archive for 八月, 2016

The case of Titanium carbide rods

Posted on: 八月 24th, 2016 by langfeng No Comments

ferro-tic rods

The original material of the teeth and the cutter applied to driving gear is high manganese steel, but now now use titanium carbide rods, titanium carbide fund is a ceramic rod, steel combined with gold rods, titanium carbide alloy rods, titanium carbide carbide rods, can greatly improve the machine driving gear and cutting tooth abrasion resistance, greatly improve the service life.

 

 

 

Planetary ball mill working principle

Posted on: 八月 22nd, 2016 by langfeng No Comments

planetary ball mill machine 5

The main content of a planetary ball mill and section describes: need a bearing mounted on two large and can be placed horizontal rotary cylinder, the cylinder with the diaphragm plate divided into several compartments, each compartment has a certain shape and contents grinding size. Planetary ball mill grinding body is generally steel balls, steel forging, steel bars, gravel, gravel and balls and the like. In order to prevent wear of the cylinder is fitted with the role of grinding mill lining material in the cylinder wall, when the planetary ball rotation, grinding and centrifugal force generated in the cylinder wall liner surface friction under the action , attached to the inner wall of the cylinder liner surface, together with the cylinder rotation, and taken to a certain height, free fall under gravity, the whereabouts of grinding as projectiles, like the impact of the material at the bottom of the crushed material .

 

Grinding rise, circular motion is the cycle of falling. In addition, during the rotation of the planetary ball mill grinding body also produces sliding and rolling, thus grinding, grinding action between the liner and the material, the material ground. Due to the feed end of the continuous feeding of new material, so that between the feed and discharge end of the material there is a difference between the material surface can be forced material flow, and drop impact when grinding materials also produce axial thrust forces the flow of materials, in addition to the mill stream Sport also helps the flow of material. Thus, although the mill shell is placed horizontally, but they can slow the flow of material from the feed end to the discharge end, complete the grinding operation.

 

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

Titanium carbide rod processing Considerations

Posted on: 八月 18th, 2016 by langfeng No Comments

ferro-tic rods

Titanium carbide rod processing Considerations
1) only suitable for high manganese steel materials.
2) casting molten steel without carbonation than ordinary titanium rods, titanium carbide cermets rods, steel with gold, carbide, titanium-based alloys, titanium carbide-based cemented carbide, enhance 60-100 degrees,
3) Before use, the first carbide, titanium rods, titanium carbide based cermet rod, bar steel with gold, carbide, titanium-based alloy rods, titanium carbide-based cemented carbide boron rods put up sand and salt solution soak, then remove and dry use (deoxy)
4) When casting, the first fixed carbide, titanium rods, titanium carbide based cermet rod, bar steel with gold, carbide, titanium-based alloy rods, titanium carbide based cemented carbide rods in steel, and then pouring molten steel, (because the density of TIC lighter than steel,
Without first fixed carbide, titanium rods, titanium carbide based cermet rod, bar steel with gold, carbide, titanium-based alloy rods, titanium carbide based cemented carbide club, stick instability.
5) After forming, heat treatment, and high-manganese steel water together water toughening treatment.

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

 

The principle of microwave furnace technology

Posted on: 八月 12th, 2016 by langfeng No Comments

LF-PH9010 Graphite and Graphene Industrial Microwave Expansion Furnace
The interaction of an electric field with a material may elicit several responses, and microwaves can be reflected, absorbed and/or transmitted by the material. In a conductor, electrons move freely in the material in response to the electric field, resulting in electric current. Unless the material is a superconductor, the flow of electrons will heat the material through resistive heating.

However, microwaves will be largely reflected from metallic conductors, and therefore such conductors are not effectively heated by microwaves. In insulators, electrons do not flow freely, but electronic reorientation or distortions of induced or permanent dipoles can give rise to heating.

For more information please link:www.industryequips.com, please contact:postmaster@industrialmicrowavefurnace.com

The after-treatment coating process

Posted on: 八月 9th, 2016 by langfeng No Comments

mo2c application

With the cutting tools become more sophisticated, customers coating quality, performance requirements are also increasing, not only requires a coating with high hardness, high wear resistance, while the tool and surface finish requirements processed products higher and higher.
Thus, after the coating treatment process began to receive widespread attention. The technology for different tools after coating, and through special equipment for coating the surface of the tool for grinding, polishing, coating tool life by this process can be further increased by 20% on the basis of conventional coatings on tool life ~ 100% or so.

 

For more information please link: www.metalcarbidepowder.com, please contact:angela@metalcarbidepowder.com

Tips of buying planetary ball mill

Posted on: 八月 6th, 2016 by langfeng No Comments

small valume planetary ball mill (1)

Buy a planetary ball mill should note the following:
1, select the appropriate grinding method according to the desired physical properties of the ground sample moisture, hardness, and viscosity planetary ball mill;
2, depending on the chemical nature of the pH of the sample required for grinding, oxidation and other select materials and forms suitable jar mill, grinding balls and material ratio;
3. The amount of processing required for sample selection for the right planetary ball mill pot and specifications;

For more information please link our company official website:http://www.langfengmetallic.com/ball-mill/planetary-ball-mill.html, please contact: postmaster@langfengmetallic.com

How to buy satisfied industrial microwave equipment

Posted on: 八月 3rd, 2016 by langfeng No Comments

LF-MF1516 70mm Industrial Microwave Tube Furnace

 

All customers want to buy genuine good products, good equipment, how can buy satisfied microwave equipment? Is not difficult, as long as the intentions of inquiry and investigation tests, some manufacturers do not just listen to too much publicity, start-up companies say, “What the largest, there are hundreds of thousands of customers,” just learn a little knowledge, to buy some components imitation assembly, and called “the most advanced technology,” some customers after the purchase of equipment to know the truth, some customers are never come to understand that all of microwave equipment and technology are the same, once the problem is negated, so really good microwave equipment suffered injustice, microwave technology application and promotion are also severely affected.

 

If you have any requirements about the rods,such as: TiC rods,ticn cermet rods,carbide rods,please kindly feel free to contact us:  postmaster@metalcarbidepowder.com, please link: http://www.industryequips.com/

The technical parameters of TiCN based cermet rods

Posted on: 八月 2nd, 2016 by langfeng No Comments

Titanium carbide Nitride cermets rod 2

Langfeng Metal manufacturer of Titanium carbide cermet rods, cermet cutting tools, cermet inserts,cermet milling cutters,cutting tool materials with the technical parameters as below:

TRS(ISO3327): 2050(N/mm2)
Density (ISO): 6.45g/cm3
Hardness(ISO3327): 92±0.5HRA
Average Grain Size: 0.8-1.0μm
Characteristic: A02B00C00

For more information please link:www.langfengmetal.com, please contact:angela@metalcarbidepowder.com

What application of the TiCN cermet rods,cermet cutting tools and cermet rods?

Posted on: 八月 1st, 2016 by langfeng No Comments

wtic application

Langfeng Metal manufacturer of cermet rods can be used to make a variety of drill, car knife, printed circuit boards, special tools, special tools engine,clocks, processing of special tools, the overall mills, chisel,mandrel and hole machining tools,and also can be used for cutting aluminum, cast iron, stainless steel, alloy steel, nickel-based alloys, titanium, non-ferrous metals,various grades and performance carbide tool manufacturers worldwide has been widely recognized,etc.

For more information please link our company official website:http://www.langfengmetallic.com/, please contact: postmaster@langfengmetallic.com